The kit includes a 5m flexible led strip reel with 2x 2m soldered cable on each end so the strip can be cut and two lengths can be made. LED Driver is also included in the kit and an additional distribution cable with clamp connector to allow a third length of LED strip to be created from any off cuts. A Corner connector is included which allows cut strip to be joined at a corner.
- Allows multiple lengths of LED Strip from one kit
- 5m Reel of LED tape with 2m soldered cable on each end to create 2 runs.
- Can be cut every 25mm
- VHB (Very High Bond) 3M tape provides maximum strength adhesion to any clean, dry, flat surface.
- 120LEDs per metre which reduces LED Spotting
- Can use the reconnection cable and corner clamp connectors to create extra lengths from cut offs